Osmo Farbe

Paint Remover Gel

colours

Removes old Decking-Oil and wood stains evenly and efficiently

Osmo Paint Remover Gel removes old Decking-Oil and wood stains on timber decking and garden furniture made of wood. Ideal for removing oil-based surface finishes on partially weathered timber decking so that an overall oil-free wood surface is achieved.

Ideal for removing oil coatings
Odourless
Biodegradable
Versatile in use
COLOUR CODECAN SIZE LITREARTICLE NUMBER

6611 Clear

0.5013900142
2.5013900143
5.0013900144
10.0013900145

Finished surface in 1 day

  1. Remove debris.
  2. Apply product thick enough (approx. 200 ml/m²) on the dry surface.
  3. Reaction time: up to 60 minutes. Keep surface damp during reaction time (e.g. with a spray bottle).
  4. Afterwards scrub the surface with a lot of clear water along the wood grain. Allow to dry for at least 48 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time.
  5. After drying, inspect the wood surface and repeat the process if necessary.
  6. If the wood surface should be re-oiled, the surface must be neutralised and remove greying with Osmo Wood Reviver Power-Gel 6609 after drying.

Note: Cover all areas that should not be treated, such as sensitive plants, porous substrates (e.g. light-coloured pebble dashed concrete, render etc.), aluminium, zinc or lacquered surfaces. Have mop water ready to rinse any surface (e.g. aluminium, zinc or lacquered areas) that accidentally come into contact with gel. Please wear safety gloves and goggles. Residues from Paint Remover Gel can have a negative influence on the drying and adhesive properties of subsequent coatings. Therefore, it is absolutely essential to thoroughly rinse the surface after treatment.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator