Osmo Farbe

Pore Filler Aqua

colours

Highly pigmented waterborne pore filler for engineered wood products

Acts as a base and mid coat on wood and engineered wood products in indoor areas, for example MDF boards.

WaterborneMicroporous and breathable surfaceRecoatable after approx. 2 hours3-5 m²/1 lReady to use
Fast drying
High filling power
Professional Product - Specialist knowledge and tools requiredLow solvent content
COLOUR CODECAN SIZE LITREARTICLE NUMBER

7036 White

Opaque

2.5011102030

NUMBER OF COATS
One coat is sufficient; a top coat is absolutely essential.

TOOLS
Flooring/Decking brushSpray gunMicrofiber RollerFlat BrushTrowel

Finished surface in 1 day, 1 coat (top coat required)

  1. First coat: Flow cup spray gun: nozzle: 2.0-2.5mm, vaporiser air pressure: 1.6-2.2 bar; Airless: nozzle: 0.23-0.28 mm, material pressure: 80-120 bar; Airmix: nozzle: 0.23-0.28 mm, material pressure: 80-100 bar, vaporiser air pressure: 1.2-1.8 bar. Application amount depends on engineered wood product and surface quality, among other things, approx. 200-300 ml/m².
  2. Drying time: under normal climatic conditions, 23 °C/50 % rel. humidity, dust-dry: approx. 45 minutes; recoatable approx. 2 hours. Forced drying (~50 °C circulating air), dust-dry: approx. 10-15 minutes; recoatable approx. 45-60 minutes.
  3. Sand the dry coating, grit P240-P360, and remove any sanding dust.
  4. Repeat Steps 1-3 if necessary, for example on highly absorbent substrates such as milled areas or edges of MDF boards.
  5. As a high-quality top coat, an opaque Osmo Spray-Wax is recommended.
Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator