| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.75 | 13300031 | ||
| 0.75 | 13300020 | ||
| 0.75 | 13300034 |
NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Cleaning of tools:
Immediately after use, with soap and water.
Drying time:
Approx. 2 hours (normal climatic conditions, 20-23°C/50-65 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times significantly.
Caution:
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Contains benzisothiazolinone (BIT); mixture of: chloromethylisothiazolinone (CIT) and methylisothiazolinone (MIT) (3:1) (preservatives). May produce an allergic reaction. Safety data sheet available on request. EU VOC limit value for this product: out of scope.
Disposal:
Dispose of product residues according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.