Osmo Farbe

Garden Colour

colours

Opaque wood finish in a multitude of colours – ideal for the exterior

Extremely weather-resistant and UV-stable, opaque satin wood finish for the exterior. Osmo Garden Colour is breathable and water repellent. The dried finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children's toys acc. EN 71.3). 

Osmo Garden Colour is best suited for all exterior wood: timber cladding, balconies, window shutters, fencing, pergolas, garden sheds, garden furniture and carports. 

WaterborneWater and dirt repellent surfaceRecoatable after approx. 3-4 hours16 m²/1 lFast drying
Low solvent content
Safe for humans, animals and plants (when dry) - Suitable for children's toys - According to DIN EN 71.3; fast to perspiration and salivaLow solvent content
Product information sheetpdf, 160 KBFull declarationpdf, 285 KBSafety datasheetpdf, 191 KB

Ingredients

Based on a polymer dispersion, titanium dioxide (white pigment), iron oxide and organic pigments, additives and preservatives (BIT and CIT/MIT). Solvent: water. This product fulfils EU regulations according to the VOC content of max. 130 g/l (Cat. A/d (2010). This product contains max. 130 g/l VOC. Detailed declaration of ingredients available upon request.

Storage

2 years or longer if stored in the originally closed container. Do not expose to frost or temperatures above 30 °C!

COLOUR CODECAN SIZE LITREARTICLE NUMBER

7103 Signal Yellow (RAL 1003)

Satin

0.7512400040

7519 Capri Blue (RAL 5019)

Satin

0.7513100305

7530 Flame Red (RAL 3000)

Satin

0.7513100315

7629 Mint Green (RAL 6029)

Satin

0.7513100322

7283 Pine Green (RAL 6009)

Satin

0.7513100092

7283 Pine Green (RAL 6009)

Satin

2.5013100091

7511 Brown Red (RAL 3011)

Satin

0.7513100338

7511 Brown Red (RAL 3011)

Satin

2.5013100340

7119 Grey Beige (RAL 1019)

Satin

0.7513100344

7119 Grey Beige (RAL 1019)

Satin

2.5013100346

7817 Chocolate Brown (RAL 8017)

Satin

0.7513100350

7817 Chocolate Brown (RAL 8017)

Satin

2.5013100352

7505 Jet Black (RAL 9005)

Satin

0.7513100326

7505 Jet Black (RAL 9005)

Satin

2.5013100328

7716 Anthracite Grey (RAL 7016)

Satin

0.7513100332

7716 Anthracite Grey (RAL 7016)

Satin

2.5013100334

7542 Traffic Grey A (RAL 7042)

Satin

0.7513100339

7542 Traffic Grey A (RAL 7042)

Satin

2.5013100341

7738 Agate Grey (RAL 7038)

Satin

0.7513100345

7738 Agate Grey (RAL 7038)

Satin

2.5013100347

7535 Light Grey (RAL 7035)

Satin

0.7513100351

7535 Light Grey (RAL 7035)

Satin

2.5013100353

7262 Pure white (RAL 9010)

Satin

0.7513100048

7262 Pure white (RAL 9010)

Satin

2.5013100047

7500 Traffic White (RAL 9016)

Satin

0.7513100222

7500 Traffic White (RAL 9016)

Satin

2.5013100223

NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.

TOOLS
Flat BrushSpray gunMicrofiber RollerPad

Wood surface must be clean, dry and frost-free (outside temperature 10°C, moisture content max. 20%). Osmo Garden Colour is ready to use. Do not thin. Stir well. If possible, please apply first coat to all sides before installation. Clean and sand old intact finishes – remove any damaged finishes (sand away). Always wear a dust mask while sanding. If additional protection against blue stain, rot and insects is desired, treat raw wood with Osmo WR Base Coat – if possible on all sides.

The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

With Osmo Flat Brush or Osmo Microfibre Roller, apply to clean dry wood thinly and quickly lap for lap with the grain or in a spray application. Leave to dry for 3-4 hours under good ventilation. After drying, fine sanding between coats as needed. Apply the second coat also thinly and evenly. If possible, apply the first coat to all sides prior to installation. For renovations, one coat is usually sufficient.

Immediately after use, with soap and water.

Approx. 3-4 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.

Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. The oils and resins in exotic wood species and certain hardwoods (Oak, Locust, Larch, etc.) must weather away prior to application. This makes the wood absorbent and the wood finish bonds optimally. 

Keep out of reach of children.

Contains

benzisothiazolinone (BIT);

mixture of: chloromethylisothiazolinone (CIT) and methylisothiazolinone (MIT) (3:1)

May produce an allergic reaction.

If medical advice is needed, have product container or label at hand.

Safety data sheet available on request.

 

Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator