Polyx®-Oil Anti-Slip / Anti-Slip Extra
colours
Ideal for wooden flooring for which higher slip resistance is required.
Osmo Polyx®-Oil Anti-Slip is ideal for the protection of all wooden floors and stairs that require higher slip resistance (commercial/public interiors), such as solid wood, plank, strip, OSB and cork flooring.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.75 | 10400077 | |
| 2.50 | 10400078 | ||
| 10.00 | 10400079 | ||
| 0.75 | 10400095 | |
| 2.50 | 10400096 | ||
| 10.00 | 10400097 | ||
| 0.75 | 10100497 | |
| 2.50 | 10100498 | ||
| 10.00 | 10100499 |
NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.
Finished surface in 2 days, 2 coats
- First coat on the raw, sanded wood approx. 35-45 ml/m².
- Mistakes in the wet coating can be corrected up to 30 minutes after the first application.
- Drying time approx. 8-10 hours (normal climatic conditions, 20-23 °C/50-65 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
- Second coat approx. 35-45 ml/m².
- Drying time approx. 10-12 hours; see point 3.
Note: Osmo Polyx®-Oil Anti-Slip cannot be evened out with a single disc machine with white pad.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.
