Spot repairs for coloured flooring
A wooden floor treated with Top Oil (Polyx®-Oil) Tints can be repaired easily – also spot repairs are possible. This is a key advantage over lacquered areas.
Here's how:
1. Separate the damaged area with masking tape.
2. Thoroughly sand the damaged area. The grit size of final sanding work should match the finished surface of the surrounding floorboards.
3. Remove sanding dust from the sanded area thoroughly with a vacuum cleaner.
4. Prepare Top Oil (Polyx®-Oil) Tints or mixture of Wood Wax Finish and Top Oil (Polyx®-Oil) Original. Ensure exactly the same mixing ratio as the original coating is used.
5. Apply a thin layer of Top Oil (Polyx®-Oil) Tints or mixture evenly with Osmo Microfibre Roller or Osmo Floor Brush/ Flat Brush. Allow to dry for approx. 24 hours, and if the results do not match, possibly repeat the steps with a lint-free cloth. Afterwards allow to dry again.
TIP: Prior to the application, carry out a trial application on a leftover piece of flooring! Please note that the colour of the wet stain is more intense than when it is dry.
6. Once dry, apply another layer of clear Top Oil (Polyx®-Oil) with a lint-free cotton cloth.
