Osmo Farbe

Polymer Composite Maintenance Oil

colours

Ideal protection against dirt and stains!

Clear satin Polymer Composite Maintenance Oil penetrates the surface and will not build a film on the surface. Through the impregnation, the surface becomes water repellent as well as resistant to dirt and stains. 

Osmo Polymer Composite Maintenance Oil is suitable as a clear care product for maintaining and restoring weathered Wood Polymer Composites (WPC) and Bamboo Polymer Composites (BPC). Especially suitable for decking, privacy screens and garden furniture made of WPC or BPC. Not suitable for co-extruded surfaces.

Based on renewable raw materialsMircoporous and breathable surfaceWater and dirt repellent surfaceEasy to clean and maintain40 m²/1 l
Oil advantages – Simple application, Water beading effect, No flaking or peelingSafe for humans, animals and plants (when dry) - Suitable for children's toys - According to DIN EN 71.3; fast to perspiration and saliva

Storage

5 years or longer if stored in the originally closed can.

COLOUR CODECAN SIZE LITREARTICLE NUMBER

030 Clear

Satin

1.0011500111

NUMBER OF COATS
One coat on the cleaned surface is enough.

TOOLS
Flat BrushFlooring/Decking brushPadCloth


Impregnation results depend significantly on the substrate and its condition. Therefore a trial application must always be carried out. With the multitude of various polymer composite (WPC & BPC) products on the market, a general recommendation for the impregnation of all products is not possible. Some polymer composites, especially those without absorbent wood or bamboo content in the surface, cannot be impregnated and are not suitable for treatment! Product coverage depends significantly on the absorption rate of the substrate. Smooth, fresh WPC or BPC absorbs much less oil than the stated application amount, while strongly weathered, rough substrates absorb much more.

Cleaning of tools:
With Osmo Brush Cleaner (free of aromatic compounds).

Drying time:
Approx. 8-10 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times significantly. After 2-3 weeks, the surface is fully cured.

Caution:
Keep out of reach of children. Safety data sheet available on request.

Disposal:
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator