Country Colour
colours
Variety of colours and unsurpassed durability – for all weather conditions!
Osmo Country Colour is an oil-based, opaque wood finish for exterior (and interior) wood furniture. When freshly applied, it appears gloss and becomes satin within a couple of weeks. It is a microporous finish which allows the wood to breathe and reduces the risk of swelling and shrinkage. Water-repellent, extremely weatherand UV-resistant. Does not crack, flake, peel or blister. Deep rich colours will hide grain and colour of the wood but will allow the texture to show through. Easy to renew, no sanding or primer necessary. Easy to apply, does not dry during application. It is safe for humans, animals and plants when dry and complies with German DIN 53160 (fast to perspiration and saliva) and EURO Norm EN 71 (suitable for children’s toys). Suitable for all weather conditions with an unsurpassed durability. The Country Colour that has been successful for decades is now available in a wide range of individual colour tones. The minimum order amount per colour tone is 1 x 2.5 litre. It can be custom made in 186 RAL Classic and 1950 NCS colours – on request also with active ingredients against mould and fungal attack.
All exterior wood furniture where exceptional resistance and durability of garden furniture is asked for. Ideal to renew old, microporous
finishes and weathered wood surfaces.
Ingredients
Based on natural plant oils, iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (benzene-free). Detailed declaration of ingredients available upon request.
Storage
5 years and longer if stored in the originally closed can. If thickened by frost, store at room temperature for 24 hours prior to use.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.75 | 11400027 | |
| 2.50 | 11400028 | ||
| 0.75 | 11400017 | |
| 2.50 | 11400018 | ||
| 0.75 | 11400036 | |
| 2.50 | 11400037 | ||
| 0.75 | 11400059 | |
| 2.50 | 11400058 | ||
| 0.75 | 11400030 | |
| 2.50 | 11400031 | ||
| 0.75 | 11400068 | |
| 2.50 | 11400069 | ||
| 0.75 | 11400126 | |
| 2.50 | 11400128 | ||
| 0.75 | 11400003 | |
| 2.50 | 11400004 | ||
| 0.75 | 11400005 | |
| 2.50 | 11400006 | ||
| 0.75 | 11400072 | |
| 2.50 | 11400073 | ||
| 0.75 | 11400115 | |
| 2.50 | 11400111 | ||
| 0.75 | 11400011 | |
| 2.50 | 11400012 | ||
| 0.75 | 11400009 | |
| 2.50 | 11400010 | ||
| 0.75 | 11400013 | |
| 2.50 | 11400014 | ||
| 0.75 | 11400015 | |
| 2.50 | 11400016 | ||
| 0.75 | 11400122 | |
| 2.50 | 11400123 | ||
| 0.75 | 11000156 | |
| 2.50 | 11000158 | ||
| 0.75 | 11400143 | |
| 2.50 | 11400144 | ||
| 0.75 | 11400149 | |
| 2.50 | 11400151 |
NUMBER OF COATS
Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!
Wood surface must be clean, dry and frost-free (moisture content max. 20 %). Osmo Country Colour is ready-to-use, please do no thin, stir well before use. Old microporous finishes must be cleaned thoroughly before application. Lacquers must be removed by sanding. Always wear a dust mask when sanding. If possible, please apply the first coat to all sides before installation.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Use stiff quality brush (Osmo Brush) or the Osmo microfibre-roller and apply thinly and evenly along wood grain on the clean and dry wood
surface. Allow for good ventilation whilst drying. Then apply a second thin coat. As a general rule 1 coat is enough for renovation.
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 12 hours (normal climatic conditions, 20-23°C/ 50-65 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times. After 2-3 weeks, the surface is fully cured.
If you want to increase the durability of the surface, we recommend, after thorough drying, to apply 1 top coat of Osmo UVProtection Oil clear (410 biocide-free or 420 with active ingredients for the preventative protection against algae and fungal decay). With Country Colour white 2101 please use the Natural Oil Woodstain 900. Owing to the surface structure, corrugated or rough sawn woods absorb more material. Some wood species tend to wash out natural watersoluble, coloured wood ingredients. The final surface quality is dependent on the woods surface structure. We therefore always recommend to test the product on a small sample area before complete application.
Keep out of reach of children.
Safety data sheet available on request.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.
