Osmo Farbe

UV-Protection-Oil Tints

colours

Protected prefectly against the sun – transparent, lightly pigmented UV protection for outdoor areas!

For all exterior wood furniture in protected areas.

Based on renewable raw materialsMircoporous and breathable surfaceCoating protected against mould, algae and fungal attackFor dimensionally stable / unstable exterior woodRecoatable after approx. 12 hours18 m²/1 l
Oil advantages – Simple application, Water beading effect, No flaking or peelingUV-Protected 12x - Tested according to EN 927-6
COLOUR CODECAN SIZE LITREARTICLE NUMBER

424 Spruce

Satin

0.7511600049
2.5011600057

425 Oak

Satin

0.7511600033
2.5011600034

426 Larch

Satin

0.7511600062
2.5011600063

427 Douglas Fir

Satin

0.7511600068
2.5011600069

428 Red Cedar

Satin

0.7511600041
2.5011600042

429 Natural

Satin

0.7511600051
2.5011600052

431 Light Red Cedar

Satin

0.7511600081
2.5011600082

432 Light Oak

Satin

0.7511600092
2.5011600093

NUMBER OF COATS
Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!

TOOLS
Flat BrushMicrofibre Roller

Finished surface in 2 days, 2 coats

  1. First coat on raw wood approx. 55 ml/m².
  2. Mistakes in the wet coating can be corrected up to 15 minutes after the first application.
  3. Drying time approx. 10-12 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher humidity can increase drying time. Allow for good ventilation.
  4. Second coat approx. 55 ml/m².
  5. Drying time approx. 12 hours; see point 3.
Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator