Osmo Farbe

WR Base Coat Aqua

colours

Ready to use, liquid wood preservative!

Osmo WR Base CoatAqua is a ready-to-use waterborne wood preservative. For the protection of wood furniture in outdoor areas without direct ground or water contact against vegetable pests such as blue stain and rot. Osmo WR Base CoatAqua has a very low odour during application, and is odourless when dry.

Wood preservative against wood-rotting and wood-staining fungi on all exterior wood without direct ground and/or surface water contact, e.g. (not under static loads) windows, shutters, pergolas, fences, timber cladding, garden furniture, etc. Do not use indoors, except for external window frames and external doors.

Mircoporous and breathable surfaceReduces swelling and shrinkageRecoatable after approx. 12 hours5-6 m²/1 lImpregnation for all Osmo coatings
Strongly water repellent
Impregnation for the exterior – Suitable for all Osmo coatings

Ingredients

0.75% 3-iodo-2-propynyl butylcarbamate (IPBC) (7.5 g/kg); 0.24% propiconazole (ISO) (2.4 g/kg)

Storage

2 years or longer if stored in the originally closed can. Do not expose to frost or temperatures above 30 °C!

COLOUR CODECAN SIZE LITREARTICLE NUMBER

4008 Clear

0.7513800100
2.5013800101

NUMBER OF COATS
One coat is sufficient; a top coat is absolutely essential.

Application for all exterior wood furniture
Coat the clean, dry and frost-free wood generously – if possible on all sides. The product should be applied evenly in order to get best results. Processing conditions: above 5°C / relative humidity below 80%.
- industrial use: dipping, flow-coating, spraying
- professional and amateur use: brush, roller, spraying.
Application quantity: 180-220 ml product per m2 (182-222g/m²)

Immediately after use, with soap and water.

Approx. 24 hours (normal climatic conditions, 23 °C/50% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.

Osmo WR Base CoatAqua is not a final coat. For untreated wood, a final treatment (e.g. with Osmo wood coatings) is required within three months. Freshly treated timber must be stored after treatment under shelter or on a hard, impermeable surface to prevent direct losses to soil and water. Any losses should be collected for re-use or disposal.

Harmful to aquatic life with long lasting effects.

Keep out of reach of children.

If medical advice is needed, have product container or label at hand.

Read carefully and follow all instructions.

Avoid release to the environment.

Dispose of contents/container in accordance with national regulations.

This material and its container must be disposed of safely as hazardous waste. Any product collected during application that is not re-used must be disposed of safely as hazardous waste. Do NOT empty into drains.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator