Polyx®-Oil Anti-Slip / Anti-Slip Extra
colours
Ideal for wooden flooring for which higher slip resistance is required.
Clear wood coating for wooden flooring in indoor areas that require a higher slip resistance. Osmo Polyx®-Oil Anti-Slip uniquely combines the advantages of natural oils and waxes in one product. It is stain-resistant, water-repellent and abrasion-resistant. Compared to conventional coatings, the use of plant ingredients creates an even colour and a more harmonious appearance. Simple application – without primer or sanding between coats – saves time and money. Suitable for wood; microporous surface will not crack, peel, flake or blister. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water acc. German DIN 68861-1A – no water spots. The dry coating is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children’s toys acc. EN 71.3).
Osmo Polyx®-Oil Anti-Slip is ideal for the protection of all wooden floors and stairs that require higher slip resistance (commercial/public interiors), such as solid wood, plank, strip, OSB and cork flooring.
Storage
5 years and longer if stored in the originally closed can. If thickened by frost, store at room temperature for 24 hours prior to use.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.75 | 10400077 | |
| 2.50 | 10400078 | ||
| 10.00 | 10400079 | ||
| 0.75 | 10400095 | |
| 2.50 | 10400096 | ||
| 10.00 | 10400097 | ||
| 0.75 | 10100497 | |
| 2.50 | 10100498 | ||
| 10.00 | 10100499 |
NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Cleaning of tools:
With Osmo Brush Cleaner (free of aromatic compounds).
Drying time:
Approx. 10-12 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times significantly. After 2-3 weeks, the surface is fully cured.
Caution:
Keep out of reach of children. Safety data sheet available on request.
Disposal:
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.
