Twice as much coverage through high oil content - saves time and money!
Transparent, satin wood stain based on natural oils for wood in outdoor areas. Microporous surface allows the wood to breathe and reduces swelling and shrinkage. Water-repellent, extremely weatherproof and UV-stable. Will not crack, peel, flake or blister. No sanding necessary, just simply recoat. Easy and seamless application. Wood stain stays workable while coating. Osmo One Coat Only HSPlus has a low content of solvents, works without any biocides or preservatives, has a high content of solids, so it offers high coverage. Even with a very thin coat, an optimal surface protection is achieved. The dry wood stain is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children‘s toys acc. EN 71.3).
Osmo One Coat Only HSPlus is ideal for the protection of all wood in outdoor areas: carports, timber cladding, balconies, fences, pergolas, garden furniture and garden sheds. Well-suited for renewing old microporous finishes.








Ingredients
Based on natural plant oil (sunflower oil), iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and additives. Dearomatised white spirit (benzene-free). EU limit value for this product (cat. A/e): 400 g/l VOC (2010). This product contains max. 400 g/l VOC. Detailed declaration of ingredients available upon request.
Storage
5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.
COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
---|---|---|---|
| 0.75 | 11101542 | |
2.50 | 11101544 | ||
| 0.75 | 11101552 | |
2.50 | 11101554 | ||
| 0.75 | 11101562 | |
2.50 | 11101564 | ||
| 0.75 | 11101572 | |
2.50 | 11101574 | ||
| 0.75 | 11101060 | |
2.50 | 11101065 | ||
| 0.75 | 11101450 | |
2.50 | 11101455 | ||
| 0.75 | 11101480 | |
2.50 | 11101485 | ||
| 0.75 | 11101030 | |
2.50 | 11101035 | ||
| 0.75 | 11101210 | |
2.50 | 11101215 | ||
| 0.75 | 11101390 | |
2.50 | 11101395 | ||
| 0.75 | 11101360 | |
2.50 | 11101365 | ||
| 0.75 | 11101420 | |
2.50 | 11101425 | ||
| 0.75 | 11101120 | |
2.50 | 11101125 | ||
| 0.75 | 11101270 | |
2.50 | 11101275 |
NUMBER OF COATS
One coat is enough!


Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo One Coat Only HSPlus is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask while sanding. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
With Osmo Flat Brush or Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 12 hours under good ventilation
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 12 hours (normal climatic conditions, 20-23°C / 50-65 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. When applied too generously, glossy spots may appear. With time, these glossy spots will weather automatically into an even satin look. Light transparent colour tones offer only limited UV protection (greying and fading through sunlight); therefore they are not recommended for surfaces exposed to strong sunlight. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.
Keep out of reach of children.
Safety data sheet available on request.
Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.
EU limit value for this product
(cat. A/e): 400 g/l VOC.
This product contains max.
400 g/l VOC.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.

HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.