Wood Reviver Power-Gel
colours
Highly effective cleaning and refreshing of greyed wood!
Cleaner for refreshing and cleaning greyed wood in outdoor areas. Wood Reviver Power-Gel is a non-drip product, and thus it is easy to apply – especially on vertical surfaces. The gel penetrates the wood deeply and removes grey patina, and afterwards by re-oiling, the fresh warm colour tone of the wood is restored.
Osmo Wood Reviver Power-Gel is highly recommended for timber decking, cladding, garden furniture and similar surfaces.
Ingredients
Osmo Wood Reviver Power-Gel contains biodegradable oxalic acid (< 5 %) and preservatives (C(M)IT/MIT). This product is free of solvents, formaldehyde, chlorine compounds and amines.
Storage
2 years or longer if stored in the originally closed container. Do not expose to frost or temperatures above 30 °C!
| COLOR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.50 | 13900115 | |
| 2.50 | 13900129 | ||
| 5.00 | 13900128 | ||
| 10.00 | 13900117 |
Generously apply the gel along the wood grain. After approx. 20 minutes reaction time, clean surface with Osmo Decking Cleaning Brush and rinse with a lot of water. After drying for approx. 48 hours, protect the newly refreshed wood with a wood finish (e.g. Osmo Natural Oil Woodstain, Decking-Oils, Country Colour). For machine processing on decking, we recommend using Osmo Decking and Flooring Cleaner.
With soap and water.
Before applying a new coating, allow the wood to dry thoroughly (approx. 24-48 hours). Lower temperatures and/or higher air humidity may increase drying times.
Protect metal (e.g. hinges) and plants against direct contact (e.g. cover ornamental and farm plants with a tarpaulin.)
Causes serious eye damage.
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a doctor.
Contains
Oxalic acid
< 5%.
mixture of CIT and MIT (3:1)
(preservatives).
May produce an allergic reaction.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 07 06 99). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.
