Osmo Farbe

Interior-Wax

colours

Hard-wearing finish with a wax-like character for wood for interior use!

Transparent or opaque, satin and hard-wearing wood finish with a wax-like character for indoor areas. Osmo Interior-Wax is stain-resistant, water-repellent and abrasion-resistant and smoothens the surface. The wood grain remains visible. Simple application – no primer or sanding between coats needed – this saves time and money. Suitable for wood; microporous surface will not crack, peel or flake. The dry finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children’s toys acc. EN 71.3).

Osmo Interior-Wax is suitable for the protection and decorative finishing of wood in indoor areas: wall and ceiling panelling, moulding and beams as well as furniture, doors and children’s toys. It is also suitable for recoating and repairing wood factory finished with Osmo Interior-Wax White Transparent (7393) or White Opaque (7394) and for recoating old wooden ceiling panelling.

	WaterborneMircoporous and breathable surfaceEasy to clean and maintainRecoatable after approx. 3-4 hours16 m²/1 lFast drying
Simple application
Odourless and supports a healthy living environment
Low solvent contentSafe for humans, animals and plants (when dry) - Suitable for children's toys - According to DIN EN 71.3; fast to perspiration and saliva

Storage

2 years or longer if stored in the originally closed can. Do not expose to frost or temperatures above 30 °C!

COLOUR CODECAN SIZE LITREARTICLE NUMBER

7393 White transparent

Satin

0.7513100226
2.5013100227
10.0013100234

7394 White opaque

Satin

0.7513100230
2.5013100231

7394 White opaque

Satin

10.0013100236

NUMBER OF COATS
Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!

TOOLS
Flat BrushMicrofibre Roller


The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Cleaning of tools:
Immediately after use, with soap and water.

Drying time:
Approx. 3-4 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times significantly.

Caution:
Keep out of reach of children. Contains benzisothiazolinone (BIT), methylisothiazolinone (MIT) May cause an allergic reaction. Information for allergy-suffers can be found at www.osmo.com/allergy-info (or under the phone number +49 172 51 56 913). Safety data sheet available on request.

Disposal:
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator