Top-Oil Original
colours
Specifically geared towards the needs of wooden flooring!
This wood coating uniquely combines the advantages of natural oils and waxes in one product. Osmo Top-Oil Original is dirt-resistant, water-repellent and abrasion-resistant, and smoothens the surface. Compared to conventional wood coatings, the use of plant ingredients creates an even colour and a more harmonious appearance. Simple application – no primer or sanding between coats needed – this saves time and money. Suitable for wood; microporous surface will not crack, peel, flake or blister. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with German DIN 68861-1A – no water spots. The dry coating is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children’s toys acc. EN 71.3). The dry coating fulfils the requirements for flammability class B2 (normally flammable) according to DIN 4102.
Osmo Top-Oil Original is ideal for protecting furniture surfaces made of solid wood, edged-glued panels, chipboards and medium density fibreboard (MDF) e.g. dining tables, drawers, desks, shelves, etc) in the interior. Also, general interior joinery, e.g, crafts, picture frames, children’s toys, chopping boards.
Ingredients
Based on natural plant oils (sunflower oil, soybean oil, thistle oil) and waxes, paraffin iron oxide and organic pigments, titanium dioxide (white pigment) siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (benzene-free).
Storage
5 years and longer if stored in the originally closed can. If thickened by frost, store at room temperature for 24 hours prior to use.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.375 | 10300161 | |
| 0.75 | 10300162 | ||
| 2.50 | 10300163 | ||
| 10.00 | 10300164 | ||
| 25.00 | 10300165 | ||
| 0.375 | 10300023 | |
| 0.75 | 10300001 | ||
| 2.50 | 10300002 | ||
| 10.00 | 10300003 | ||
| 25.00 | 10300004 | ||
| 0.375 | 10300043 | |
| 0.75 | 10300045 | ||
| 2.50 | 10300050 | ||
| 10.00 | 10300055 | ||
| 25.00 | 10300057 | ||
| 0.375 | 11100118 | |
| 0.75 | 11100119 | ||
| 2.50 | 11100120 | ||
| 10.00 | 11100121 | ||
| 25.00 | 11100109 | ||
| 0.75 | 10300021 | |
| 2.50 | 10300022 | ||
| 10.00 | 10300034 | ||
| 0.75 | 10300069 | |
| 2.50 | 10300073 | ||
| 10.00 | 10300079 | ||
| 25.00 | 10300119 | ||
| 0.75 | 10300406 | |
| 2.50 | 10300408 | ||
| 10.00 | 10300411 | ||
| 0.75 | 10100294 | |
| 2.50 | 10100300 | ||
| 10.00 | 10300135 | ||
| 0.75 | 10100302 | |
| 2.50 | 10100303 | ||
| 10.00 | 10300205 | ||
| 0.75 | 10100305 | |
| 2.50 | 10100306 | ||
| 10.00 | 10300235 | ||
| 0.75 | 10100311 | |
| 2.50 | 10100312 | ||
| 10.00 | 10300285 | ||
| 0.75 | 10100317 | |
| 2.50 | 10100318 | ||
| 10.00 | 10300295 |
NUMBER OF COATS
Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!
Surface Preparation:
Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Top-Oil is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (Wood Filler or Wood Putty). Sand wood surfaces carefully. Depending on wood species, begin with coarse sandpaper – final sanding work, clear: for flooring P100-120, for furniture P120-180. Final sanding work, coloured/Natural: for an intense colour und more surefootedness at least grit P100. For a harmonious colour grit P120-150. For furniture grit P120-180. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Methods of Application:
Apply thinly and evenly along the wood grain with either a cloth, a hard brush (Osmo Natural Bristle Brush) or the Osmo Microfibre Roller, and spread well. Allow for good ventilation whilst drying. Apply a second coat as before. For the renovation of oiled/waxed surfaces, generally only 1 coat is required. This should be applied to a clean and dry surface.
Cleaning of tools:
With Osmo Brush Cleaner (free of aromatic compounds).
Drying time:
Approx. 8-10 h (clear) and approx. 24h (coloured/natural) under normal climatic conditions (20-23°C/50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times significantly.
Note:
Oils enhance the natural tone of wood (permanent wet effect). Top-Oil Original 3041 Natural as a base coat counteracts this effect thanks to a low content of white pigments. It creates a natural looking surface on light-coloured European wood species, such as Oak, Ash, Pine etc. Apply Top-Oil 3041 Natural for the 1st coat. For the second coat, use a clear matt Top-Oil to produce the natural look. Trial application recommended. For Top-Oil 3040 White, use also 3040 White or 3041 Natural as the top coat to prevent yellowing. !Attention! The following applies to all Top-Oil variants: Applying the product too generously and insufficient ventilation lead to delays in drying time. Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth. Not recommended for dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), Product recommendations available upon request or at www.osmo.com.
Caution:
Keep out of reach of children. Do not get in eyes, on skin, or on clothing. If medical advice is needed, have product container or label at hand. Use only outdoors or in a well-ventilated area. The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations. Safety data sheet available on request.
Disposal:
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.
