Top-Oil Rapid
colours
The renowned Top-Oil in a fast-drying variation!
Clear or transparent professional fast drying Osmo finish, which combines all the advantages of oils and waxes in one unique product Osmo Top-Oil Rapid is resistant to water and dirt, is very durable and smoothens wood surfaces. Easy application – only two coats, no primer, no sanding between coats – saves time and money. It meets the wood’s natural demands: It is microporous and does not crack, flake, peel or blister. The surface will be protected against common household substances such as wine, beer, cola, coffee, tea, fruit juice, milk and water according to DIN 68861-1C – no water spots. The dried finish is safe for people, animals and plants (saliva-resistant and sweatproof acc. DIN 53160, suitable for children’s toys acc. EN 71.3).
Osmo Top-Oil Rapid is ideal for protecting furniture surfaces made of solid wood, edged-glued panels, chipboards and medium density fibreboard (MDF) e.g. dining tables, drawers, desks, shelves, etc) in the interior. Also, general interior joinery, e.g, crafts, picture frames, children’s toys, chopping boards.
Ingredients
Based on natural vegetable oils and waxes, paraffins, titanium dioxide (white pigment), siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (benzene-free).
Storage
5 years and longer if stored in the originally closed can. If thickened by frost, store at room temperature for 24 hours prior to use.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.75 | 10300093 | |
| 2.50 | 10300092 | ||
| 10.00 | 10300091 | ||
| 25.00 | 10300085 | ||
| 0.75 | 10300101 | |
| 2.50 | 10300098 | ||
| 10.00 | 10300097 | ||
| 25.00 | 10300096 | ||
| 0.75 | 15100512 | |
| 2.50 | 15100513 | ||
| 10.00 | 15100518 | ||
| 25.00 | 15100519 |
NUMBER OF COATS
Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!
Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Polyx®-Oil is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (Wood Filler or Wood Putty). Sand wood surfaces carefully. Depending on wood species, begin with coarse sandpaper – final sanding work for flooring P100-120, for furniture P120-180. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Apply thinly and evenly along the wood grain with either a cloth, a hard brush (Osmo Natural Bristle Brush) or the Osmo Microfibre Roller, and spread well. 1st coat: Apply thinly. Spread evenly and thoroughly within 10-15 minutes. Remove any surplus immediately. Dry at approx. 4-5 hours (clear) orapprox. 8-10 hours (White Transparent). Allow for good ventilation. Apply a second coat as before.
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 5-6 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying. For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended. For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly. On cork, longer drying times are to be taken into consideration (at least 6-8 hours). Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth. Wood surfaces treated with Polyx®-Oil Rapid are easy to maintain. Remove debris with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp (not wet!) mop. To refresh and clean intensively, use Osmo Liquid Wax Cleaner when necessary. If a higher gloss level is desired, after thoroughly drying apply Osmo Liquid Wax Cleaner thinly and polish when dry.
Flammable liquid and vapour.
Keep out of reach of children.
Keep away from heat/open flames. No smoking.
Do not get in eyes, on skin, or on clothing.
If medical advice is needed, have product container or label at hand.
The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations.
Safety data sheet available on request.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 11*). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.