Osmo Farbe

Uviwax® UV-Protection

colours

Unique UV protection for indoor areas!

Clear or transparent coloured, satin wood coating with a wax-like character for interior use. Osmo Uviwax® UV-Protection guards the lignin in the wood against harmful UV radiation. The natural yellowing of wood is greatly reduced, and the natural, light-coloured wood tone is preserved for a long time. Osmo Uviwax® UV-Protection is stain-resistant, water-repellent and abrasion-resistant and smoothens the surface. Suitable for wood; microporous surface will not crack, peel, flake or blister. The dry finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children’s toys acc. EN 71.3).

Osmo Uviwax® UV-Protection is suitable for single product applications on wall and ceiling panelling as well as cabinets and doors in indoor areas. It is also suitable for recoating sawn edges and screw holes, additional mouldings, boards etc. that have been factory finished with Osmo Uviwax® UV-Protection. Suitable for all light-coloured wood species.

	WaterborneMircoporous and breathable surfaceEasy to clean and maintainRecoatable after approx. 3-4 hours16 m²/1 lUV protection, no yellowing
Odourless and supports a healthy living environment
Fast drying
Unique long-term protection against UV light - Greatly reduces natural yellowingSafe for humans, animals and plants (when dry) - Suitable for children's toys - According to DIN EN 71.3; fast to perspiration and saliva

Storage

2 years or longer if stored in the originally closed can. Do not expose to frost or temperatures above 30 °C!

COLOUR CODECAN SIZE LITREARTICLE NUMBER

7200 Clear

Satin

0.7513200051
2.5013200050
10.0013200145

7266 White Spruce

Satin

0.7513200135
2.5013200136
10.0013200056

NUMBER OF COATS
Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!

TOOLS
Flat BrushMicrofibre Roller


The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Cleaning of tools:
Immediately after use, with soap and water.

Drying time:
Approx. 3-5 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times significantly.

Caution:
If medical advice is needed, have product container or label at hand. Keep out of reach of children. Contains benzisothiazolinone (BIT), methylisothiazolinone (MIT) May cause an allergic reaction. Information for allergy-suffers can be found at www.osmo.com/allergy-info (or under the phone number +49 172 51 56 913). Safety data sheet available on request.

Disposal:
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator