Country Colour
colours
Variety of colours and unsurpassed durability – for all weather conditions!
Opaque, at first slightly satin-gloss then satin, natural oil based finish for wood in outdoor areas. Wood tone and grain is covered. The wood texture remains noticeable. Microporous surface allows the wood to breathe and reduces swelling and shrinkage. Water-repellent, extremely weatherproof and UV stable surface does not crack, peel, flake or blister. No sanding necessary, just simply recoat; no primer is needed. Easy and seamless application. Finish stays workable while coating. The dry finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children’s toys acc. EN 71.3)
Osmo Country Colour is best suited for all wood in outdoor areas where an especially durable coating is required: timber cladding, balconies, windows and window shutters, fences, pergolas, wooden shingles, garden furniture and garden sheds, carports etc. Ideal for renewing old microporous finishes and weathered wooden surfaces.
Ingredients
Based on natural plant oils (sunflower oil, soybean oil and thistle oil), iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (benzene-free). Detailed declaration of ingredients available upon request.
Storage
5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.75 | 11400027 | |
| 2.50 | 11400028 | ||
| 0.75 | 11400017 | |
| 2.50 | 11400018 | ||
| 0.75 | 11400036 | |
| 2.50 | 11400037 | ||
| 0.75 | 11400059 | |
| 2.50 | 11400058 | ||
| 0.75 | 11400030 | |
| 2.50 | 11400031 | ||
| 0.75 | 11400068 | |
| 2.50 | 11400069 | ||
| 0.75 | 11400126 | |
| 2.50 | 11400128 | ||
| 0.75 | 11400003 | |
| 2.50 | 11400004 | ||
| 0.75 | 11400005 | |
| 2.50 | 11400006 | ||
| 0.75 | 11400072 | |
| 2.50 | 11400073 | ||
| 0.75 | 11400115 | |
| 2.50 | 11400111 | ||
| 0.75 | 11400011 | |
| 2.50 | 11400012 | ||
| 0.75 | 11400009 | |
| 2.50 | 11400010 | ||
| 0.75 | 11400013 | |
| 2.50 | 11400014 | ||
| 0.75 | 11400015 | |
| 2.50 | 11400016 | ||
| 0.75 | 11400122 | |
| 2.50 | 11400123 | ||
| 0.75 | 11000156 | |
| 2.50 | 11000158 | ||
| 0.75 | 11400143 | |
| 2.50 | 11400144 | ||
| 0.75 | 11400149 | |
| 2.50 | 11400151 |
NUMBER OF COATS
Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!
Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Country Colour is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear dust mask while sanding.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. When renovating, one coat applied to the clean and dry surface is usually sufficient.
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 12 hours (normal climatic conditions, 20-23°C / 50-65 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
Country Colour, which has been trusted for over decades, is also available in the colour of your choice. Starting from 2.5 litres per colour tone, available in 186 RAL Classic and 1950 NCS colour tones, as well as with biocidal film protection additives. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.
Keep out of reach of children.
Do not get in eyes, on skin, or on clothing.
If medical advice is needed, have product container or label at hand.
Use only outdoors or in a well-ventilated area.
Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist.
Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.
The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations.
Safety data sheet available on request.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.