Osmo Farbe

One Coat Only HS Plus

colours

Twice as much coverage through high oil content - saves time and money!

Transparent, satin wood stain based on natural oils for wood in outdoor areas. Microporous surface allows the wood to breathe and reduces swelling and shrinkage. Water-repellent, extremely weatherproof and UV-stable. Will not crack, peel, flake or blister. No sanding necessary, just simply recoat. Easy and seamless application. Wood stain stays workable while coating. Osmo One Coat Only HSPlus has a low content of solvents, works without any biocides or preservatives, has a high content of solids, so it offers high coverage. Even with a very thin coat, an optimal surface protection is achieved. The dry wood stain is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children‘s toys acc. EN 71.3).

Osmo One Coat Only HSPlus is ideal for the protection of all wood in outdoor areas: carports, timber cladding, balconies, fences, pergolas, garden furniture and garden sheds. Well-suited for renewing old microporous finishes.

Based on renewable raw materialsMicroporous and breathable surfaceWater and dirt repellent surface26 m²/1 lHigh coverage thanks to high solids content
Only 1 coat
Free of biocides
Oil advantages – Simple application, Water beading effect, No flaking or peelingSafe for humans, animals and plants (when dry) - Suitable for children's toys - According to DIN EN 71.3; fast to perspiration and saliva
Product information sheetpdf, 642 KBFull declarationpdf, 283 KBSafety datasheetpdf, 177 KB

Ingredients

Based on natural plant oil (sunflower oil), iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and additives. Dearomatised white spirit (benzene-free). EU limit value for this product (cat. A/e): 400 g/l VOC (2010). This product contains max. 400 g/l VOC. Detailed declaration of ingredients available upon request.

Storage

5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.

COLOUR CODECAN SIZE LITREARTICLE NUMBER

9203 Basalt Grey

Transparent

0.7511101542
2.5011101544

9205 Patina

Transparent

0.7511101552
2.5011101554

9206 Light Oak

Transparent

0.7511101562
2.5011101564

9207 Quartz Grey

Transparent

0.7511101572
2.5011101574

9211 White Spruce

Transparent

0.7511101060
2.5011101065

9212 Silver Poplar

Transparent

0.7511101450
2.5011101455

9221 Pine

Transparent

0.7511101480
2.5011101485

9235 Red Cedar

Transparent

0.7511101030
2.5011101035

9236 Larch

Transparent

0.7511101210
2.5011101215

9241 Oak

Transparent

0.7511101390
2.5011101395

9261 Walnut

Transparent

0.7511101360
2.5011101365

9262 Teak

Transparent

0.7511101420
2.5011101425

9264 Rosewood

Transparent

0.7511101120
2.5011101125

9271 Ebony

Transparent

0.7511101270
2.5011101275

NUMBER OF COATS
One coat is enough!

TOOLS
Flat BrushMicrofiber Roller

Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo One Coat Only HSPlus is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask while sanding. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.

The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

With Osmo Flat Brush or Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 12 hours under good ventilation

With Osmo Brush Cleaner (free of aromatic compounds).

Approx. 12 hours (normal climatic conditions, 20-23°C / 50-65 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.

Transparent colours are influenced by the natural colour of the wood and therefore they may deviate from the sample colours. When applied too generously, glossy spots may appear. With time, these glossy spots will weather automatically into an even satin look. Light transparent colour tones offer only limited UV protection (greying and fading through sunlight); therefore they are not recommended for surfaces exposed to strong sunlight. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.

Keep out of reach of children.

Safety data sheet available on request.

Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.

EU limit value for this product

(cat. A/e): 400 g/l VOC.

This product contains max.

400 g/l VOC.

Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator