Polyx®-Oil Care and Repair Paste

Surface preparation:
Wood surface must be clean and dry. It is sufficient to wipe the surface with a lint-free cloth. Strongly contaminated surfaces can be cleaned with, for example, Osmo Spray Cleaner and rubbed dry. Sand small cracks, larger gaps or holes in wood and, if necessary, patch with Osmo Wood Filler.

Methods of application:
With a lint-free cloth, apply thinly along the wood grain. Allow to dry for approx. 8-10 hours under good ventilation. If necessary, repeat the application as described above 2-3 times.

Drying time:
Approx. 8-10 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times significantly. After 2-3 weeks, the surface is fully cured.

Note:
Oils enhance the natural colour of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying. If a higher gloss level is desired, after thoroughly drying apply Osmo Liquid Wax Cleaner thinly and polish when dry.

Caution:
Safety data sheet available on request. Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.

Disposal:
Dispose of product residues according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.