Osmo Farbe

Opaque Gloss Wood Stain

colours

The window and door finish that will not crack, peel, flake or blister!

Opaque lightly satin-gloss, microporous wood finish with unsurpassed durability. Osmo Opaque Gloss Wood Stain has an extremely high solid content of 85%. This high content of permanent components results in high durability and product coverage. Osmo Gloss Wood Stain is block-resistant and will not crack, peel, flake or blister. Therefore it is the ideal, professional coating for windows, doors and windowsills. No sanding necessary, just simply recoat; no primer needed. Easy and seamless application. Finish stays workable while coating. When dry, finish is safe for humans, animals and plants and is suitable for children’s toys as per EN 71.3 (European norm) and is resistant to saliva and perspiration according to DIN 53160 (German industrial norm).

Osmo Opaque Gloss Wood Stain is especially suitable for all wood in indoor and outdoor areas. Ideal for coating or recoating dimensionally stable elements, such as windows, window shutters and doors, as well as dimensionally unstable elements, such as roof soffits, fences, screens, pergolas, posts, garden gazebos, greenhouses and garden furniture.

Based on renewable raw materialsMicroporous and breathable surfaceWater and dirt repellent surfaceFor dimensionally stable / unstable exterior woodRecoatable after approx. 10-12 hours20 m²/1 lEspecially developed for windows and doors
Oil advantages – Simple application, Water beading effect, No flaking or peelingSafe for humans, animals and plants (when dry) - Suitable for children's toys - According to DIN EN 71.3; fast to perspiration and saliva
Product information sheetpdf, 364 KBFull declarationpdf, 185 KBSafety datasheetpdf, 180 KB

Ingredients

Based on natural plant oils (sunflower oil, soybean oil), titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives. Volatile component: dearomatised white spirit (benzene-free). EU limit value for this product (cat. A/d): 300 g/l VOC (2010). This product contains max. 300 g/l VOC. Detailed declaration of ingredients available upon request.

Storage

5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.

COLOUR CODECAN SIZE LITREARTICLE NUMBER

2104 White

Satin

0.7511200002
2.5011200003

NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.

TOOLS
Flat BrushMicrofiber Roller

Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Opaque Gloss Wood Stain is ready to use, please do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask while sanding. If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Apply thinly and evenly to the clean and dry wood along the wood grain with Osmo Flat Brush or Osmo Microfibre Roller and spread well.
Allow to dry for approx. 10 -12 hours under good ventilation. After drying, apply a second coat – also thinly. When renovating, one coat applied to the clean and dry surface is usually sufficient.

With Osmo Brush Cleaner (free of aromatic compounds).

Approx. 12 hours (normal climatic conditions, 23 °C/ 50% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.

Due to the high oil content, the coating has a light yellowing effect when used on darker interior surfaces.

Safety data sheet available on request.

Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.

EU limit value for this product

(cat. A/d): 300 g/l VOC.

300 g/l VOC.

Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator