Garden Stain
colours
Top coat in a variety of colours - ideal for the exterior
Extremely weather-resistant and UV stable, transparent coloured, satin wood coating for the exterior. Osmo Garden Stain is microporous and water-repellent. The dried coating is safe for humans, animals and plants (resistant to saliva and perspiration as per DIN 53160, suitable for children's toys as per EN 71.3).
Osmo Garden Stain is best suited for every exterior wood (except for decking): timber cladding, balconies, window shutters, fencing, pergolas, sheds, garden furniture, carports.
Ingredients
Based on a polymer dispersion, titanium dioxide (white pigment), iron oxide and organic pigments, additives and preservatives (BIT and CIT/MIT). Solvent: water. Detailed declaration of ingredients available upon request.
Storage
2 years or longer if stored in the originally closed container. Do not expose to frost or temperatures above 30 °C!
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.75 | 13100366 | |
| 2.50 | 13100367 | ||
| 0.75 | 13100369 | |
| 2.50 | 13100370 | ||
| 0.75 | 13100372 | |
| 2.50 | 13100373 | ||
| 0.75 | 13100375 | |
| 2.50 | 13100376 | ||
| 0.75 | 13100378 | |
| 2.50 | 13100379 | ||
| 0.75 | 13100381 | |
| 2.50 | 13100382 | ||
| 0.75 | 13100384 | |
| 2.50 | 13100385 | ||
| 0.75 | 13100387 | |
| 2.50 | 13100388 |
NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.
Wood surface must be clean, dry and frost-free (outside temperature 10 °C, moisture content max. 18%). Osmo Garden Stain is ready to use. Do not thin. Stir well. If possible, please apply first coat to all sides before installation. Clean and sand existing intact finishes – remove any damaged finishes (sand away). Always wear a dust mask while sanding.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
With Osmo Flat Brush, Microfibre Roller or Coating Applicator Fleece, apply thinly and quickly lap for lap along the grain or in a spray application. Leave to dry for 3-4 hours under good ventilation. After drying, fine sanding between coats as needed. Apply the second coat also thinly and evenly. If possible, apply the first coat to all sides prior to installation. For renovations, one coat is usually sufficient.
Immediately after use, with soap and water.
Approx. 4-5 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. The oils and resins in exotic wood species and certain hardwoods (Oak, Locust, Larch, etc.) must weather away prior to application. This makes the wood absorbent and the wood finish bonds optimally.
Keep out of reach of children.
Contains
benzisothiazolinone (BIT);
mixture of: chloromethylisothiazolinone (CIT) and methylisothiazolinone (MIT) (3:1)
May produce an allergic reaction.
If medical advice is needed, have product container or label at hand.
Harmful to aquatic life with long lasting effects.
Avoid release to the environment.
Safety data sheet available on request.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.