Osmo Farbe

Natural Oil Woodstain Effect

colours

Twice as much coverage through high oil content - saves time and money!

Decorative, protective, satin wood stain with metallic effects based on natural oils for any wood in the exterior. Microporous surface allows the wood to breathe and reduces swelling and shrinkage. Water-repellent and extremely weather-resistant and UV-stable surface does not crack, peel, flake or blister. No sanding necessary, just simply recoat; no primer is needed. Easy and seamless application. Wood stain stays workable while coating. Wood stain contains active ingredients to protect against mould, algae and fungal attack and has proven itself over decades, and also under extreme climatic conditions.

Osmo Natural Oil Woodstain Effect is ideal for all wood in outdoor areas: doors, windows and window shutters (dimensionally stable elements), carports, wood siding, balconies, fences, pergolas, garden furniture and garden sheds (dimensionally unstable elements).

Based on renewable raw materialsMicroporous and breathable surfaceCoating protected against mould, algae and fungal attackWater and dirt repellent surfaceFor dimensionally stable / unstable exterior woodRecoatable after approx. 4-6 hours26 m²/1 l
Oil advantages – Simple application, Water beading effect, No flaking or peelingFilm protection – Coating is protected against mould, algae and fungal attack
Product information sheetpdf, 193 KBFull declarationpdf, 54 KBSafety datasheetpdf, 250 KB

Ingredients

Based on natural plant oils (sunflower oil, soybean oil, thistle oil and linseed oil), iron oxide and organic pigments, titanium dioxide white pigment, effect pigments, siccatives (drying agents) and additives. Biocidal active ingredient: 3-iodo-2-propynyl butylcarbamate (IPBC). Dearomatised white spirit (benzene-free). Detailed declaration of ingredients available upon request.

Storage

5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.

COLOUR CODECAN SIZE LITREARTICLE NUMBER

1140 Agate-Silver

Satin

0.7512100230
2.5012100231

1142 Graphite Silver

Satin

0.7512100242
2.5012100243

1143 Onyx Silver

Satin

0.7512100248
2.5012100249

NUMBER OF COATS
Two coats on raw wood; for renovations, normally one coat on the clean surface is sufficient – without sanding!

TOOLS
Flat BrushMicrofiber RollerPad

Wood surface must be clean, dry and frost-free (moisture content max. 20%). Osmo Natural Oil Woodstain is ready to use. Do not thin. Stir well before use. If possible, please apply the first coat to all sides before installation. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask while sanding. 

The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Apply thinly and evenly to the clean and dry wood along the wood grain with Osmo Flat Brush, Osmo Finish Applicator Fleece or Osmo Microfibre Roller and spread well. Leave to dry for approx. 4-6 hours. Ventilate well. After drying, apply a second coat also thinly and quickly. When renovating, one coat applied to the clean and dry surface is usually sufficient. 

With Osmo Brush Cleaner (free of aromatic compounds).

Approx. 12 hours (normal climatic conditions, 20-23°C / 50-65 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.

Dried surface is satin-glossy at first and is afterwards satin. Light-coloured transparent finishes offer only limited UV protection and are therefore not recommended for surfaces exposed to strong sunlight. The transparent colour tone is influenced by the natural wood colour and may deviate from the colour chart. Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered. Osmo Natural Oil Woodstain Effect contains biocides and is therefore only to be used on exterior areas. The added active ingredients delay or minimise the risk of algae and fungal attack. For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided.

Flammable liquid and vapour.

Harmful to aquatic life with long lasting effects.

If medical advice is needed, have product container or label at hand.

Keep out of reach of children.

Keep away from heat/open flames. No smoking.

Avoid release to the environment.

Store in a well-ventilated place. Keep cool.

Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.

Contains

3-Iodo-2-propynylbutylcarbamate

(film protection).

May produce an allergic reaction.

EU limit value for this product

(cat. A/e): 400 g/l VOC.

This product contains max.

400 g/l VOC.

Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 11*). Only completely emptied containers can be recycled.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator

We are the only manufacturer to finish its own wood products with paints from its own development and production. Worldwide, the name Osmo stands for quality made in Germany.
More references