Osmo Farbe

Chopping Board Oil

colours

Oil-wax wood coating

Clear oil-wax combination for wooden chopping boards. Osmo Chopping Board Oil is based on natural plant oils and waxes. Suitable for wood; microporous surface will not crack, peel, flake or blister. Resistant against wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with German DIN 68861-1A – no water spots. The dry finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160). Osmo Chopping Board Oil is food safe acc. EN 1186 Part 5 / 14.

Osmo Chopping Board Oil is ideal for the protection of wooden chopping boards.

Based on renewable raw materialsMicroporous and breathable surfaceResistant to wine, beer, colaEasy to clean and maintainRecoatable after approx. 8-10 hours24  m²/1 lScratch-resistant and hard-wearing
Simple application
Enhances the colour of the substrate
Unique Oil-Wax combination: Water- and dirt-resistant - Easy to use - DurableFood safe (EURO-Norm 1186 part 5/14) - Safe for humans, animals and plants when dry
Product information sheetpdf, 592 KBFull declarationpdf, 183 KBSafety datasheetpdf, 168 KB

Ingredients

Based on natural plant oils (sunflower, soybean and thistle oils) and waxes, paraffin, lead-free siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (benzene-free). VOC classification in compliance with EU regulations (2004/42/EC): out of scope. Detailed declaration of ingredients available upon request.

Storage

5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.

COLOUR CODECAN SIZE LITREARTICLE NUMBER

3099 Clear

Matt

0.5013900160

NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.

TOOLS
Flat BrushMicrofiber RollerPadCloth

Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Chopping Board Oil is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dusk mask while sanding. Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work P150-240 (depending on wood species). Before oiling the surface, remove sanding dust with a broom or vacuum cleaner.

The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

Apply the first coat thinly along the wood grain with an Osmo Microfibre Roller, Flat Brush or Oil Finish Applicator Fleece. Allow to dry for approx. 8-10 hours. Ventilate well while drying. Apply the second coat with an Osmo Oil Finish Applicator Fleece or a lint-free cloth. For renovations, one coat applied to the clean and dry surface with an Oil Finish Applicator Fleece or lint-free cloth is usually sufficient.

With Osmo Brush Cleaner (free of aromatic compounds).

Approx. 8-10 hours (normal climatic conditions, 23 °C/ 50% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times. After 2-3 weeks, the surface is fully cured.

Osmo Chopping Board Oil Clear enhances the wood colour (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying time. Surfaces treated with Osmo Chopping Board Oil can be cleaned effortlessly with a damp cloth; afterwards rub dry.

Keep out of reach of children.

Safety data sheet available on request.

Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.

EU limit value for this product

: out of scope.

Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator