High quality oil-wax finish – especially developed for professional users!
Highly effective, microporous oil-wax combination with high mechanical and chemical resistance for stairs, work surfaces and furniture. Osmo Spray-Wax is based on natural, plant oils and waxes, stain-resistant, water-repellent and abrasion-resistant and smoothens the surface. Suitable for wood; microporous surface will not crack, peel, flake or blister. Resistant against wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with German DIN 68861-1A/EN 12720 – no water spots. The dry finish is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children‘s toys acc. EN 71.3).
Osmo Spray-Wax is ideal for all timber in indoor areas, for which a durable, low-maintenance and hard-wearing surface is necessary, e.g. stairs, furniture, table tops, kitchen worktops, toys, parquet, flooring etc. Especially well suited for use in wet rooms, such as bathrooms and kitchens.









Ingredients
Based on natural plant oils (sunflower oil, soybean oil, thistle oil) and waxes, paraffin, iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (benzene-free). EU limit value for this product (cat. A/i): 500 g/l VOC (2010). This product contains max. 500 g/l VOC. Detailed declaration of ingredients available upon request.
Storage
5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.
COLOR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
---|---|---|---|
| 1.00 | 15101001 | |
2.50 | 15101000 | ||
10.00 | 15101004 | ||
25.00 | 15101006 | ||
| 1.00 | 15101025 | |
2.50 | 15101027 | ||
10.00 | 15101031 | ||
| 1.00 | 15101016 | |
2.50 | 15101015 | ||
10.00 | 15101019 | ||
| 1.00 | 15101083 | |
2.50 | 15101084 | ||
10.00 | 15101086 | ||
| 1.00 | 15001182 | |
2.50 | 15001180 | ||
10.00 | 15001181 | ||
| 1.00 | 15101020 | |
2.50 | 15101021 | ||
10.00 | 15101023 | ||
| 1.00 | 15101011 | |
2.50 | 15101010 | ||
10.00 | 15101014 | ||
| 1.00 | 15100901 | |
2.50 | 15100900 | ||
10.00 | 15100904 | ||
25.00 | 15100910 | ||
| 1.00 | 15100906 | |
2.50 | 15100905 | ||
10.00 | 15100909 | ||
25.00 | 15100915 | ||
| 1.00 | 15101071 | |
2.50 | 10100521 |
NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.

Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Spray-Wax is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dusk mask while sanding. Fill small cracks, larger joints or holes in wood (with Osmo Wood Filler). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work forfor furniture grit P 120-180. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Spray Wax is ready to use. Stir well before use
1. Coat: with cup spray gun, RP Technology or Airless/Airmix
Application amount is, among other things, dependant on the wood species and sanding grade etc, approx. 35-40 g/m² (3010 Natural 20-25 g/m²). Ventilate well while drying. Inbetween sanding/de-nibbing: min: P220 sanding grit
2. Coat: with cup spray gun, RP Technology or Airless/Airmix
Application amount is, among other things, dependant on the wood species and sanding grade etc, approx. 35-40 g/m². Ventilate well while drying. The second coat after applying Spray-Wax 3010 Natural depends on the desired surface results (trial application):
a)Top coat with Spray-Wax 3010 Natural for a slightly white colouration.
b)Top coat with Spray-Wax 3084 Clear for a “like untreated” look.
Osmo Spray-Wax can also be applied with a brush or cloth.
Spray parameters:
Cup spray gun:
Spray pressure approx. 2.5 - 3.5 bar, Nozzle approx. 1.3 - 2.0 mm
RP (Reduced Pressure) Technology:
Spray pressure approx. 1.6 - 2.0 bar, Nozzle approx. 1.6 - 1.8 mm
Airless/Airmix:
Depending on the operation of the operator/machine, the equipment and the condition of the respective system as well as the type and shape of the workpieces to be treated. Due to the large variety of application tools/possibilities with this system, it is unrealistic to state target values.
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 8-10 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Lower temperatures and/or higher humidity increase drying times significantly. Ventilate well while drying.
Oils enhance the natural tone of wood (permanent wet effect). For cabinet interiors and drawers, apply max. one coat thinly with a cloth. For a colour treatment, Osmo Oil Stain is ideal – just apply as a base coat. For dark woods and hardwoods rich in extractives (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin. A trial application is recommended. Wood surfaces treated with Spray-Wax are easy to maintain. Remove debris with a broom or a vacuum cleaner. For cleaning, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp (not wet!) mop. For refreshing and intensive cleaning, use Osmo Liquid Wax Cleaner when necessary. If a higher gloss level is desired, after thoroughly drying apply Osmo Liquid Wax Cleaner thinly and polish when dry.
Flammable liquid and vapour.
Keep away from heat/open flames. No smoking.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/eye protection.
IF ON SKIN: Wash with plenty of water.
In case of fire: Use for extinction: CO2, powder or water spray.
Store in a well-ventilated place. Keep container tightly closed.
Dispose of contents/container in accordance with chemical waste disposal regulations.
Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.
Must not be used in the same spraying chamber used for lacquers/varnishes which have a NC (Nitro cellulose) content (danger of self-ignition). Please note all relevant regulations and rules for spray application chambers (German standards BGI 740 for spraying chambers).
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 11*). Only completely emptied containers can be recycled.

HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.