Tannin Spot Remover
colours
Highly effective removal of black spots on wood species containing tannic acid (Oak).
Specialised cleaner for removing black tannin stains and spots on untreated or oiled wood surfaces in indoor areas.
Osmo Tannin Spot Remover is especially recommended for wooden flooring (e.g. parquet), work surfaces or garden decking and furniture made of Oak.
Ingredients
Osmo Tannin Spot Remover contains biodegradable oxalic acid.
Storage
2 years or longer if stored in the originally closed container. Do not expose to frost or temperatures above 30 °C!
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.25 | 13900149 |
Spray Osmo Tannin Spot Remover evenly onto the spot until the surface is completely covered. Allow product to react for 30-45 minutes and wipe with a lint-free cloth. If necessary, repeat and then wipe clean with clear water. After drying, apply a suitable Maintenance Oil on the treated area, so that the wood is protected again.
With soap and water.
Before applying a new coating, allow the wood to dry thoroughly (approx. 24-48 hours). Lower temperatures and/or higher air humidity may increase drying times.
Protect metal (e.g. furniture hardware) and plants against direct contact (e.g. cover farm and ornamental plants with a tarpaulin or place out of reach).
If medical advice is needed, have product container or label at hand.
Keep out of reach of children.
Contains
mixture of: chloromethylisothiazolinone (CIT) and methylisothiazolinone (MIT) (3:1)
(preservatives).
Oxalic acid
< 5%.
May produce an allergic reaction.
Safety data sheet available on request.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 07 06 99). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.