Highly effective special cleaning concentrate with natural ingredients - for regular cleaning and care!
Water-soluble concentrate for everyday cleaning and care – especially developed for oiled and waxed wooden floors. When used regularly, highly effective Osmo Wash and Care produces a low-maintenance, non-slip surface. The water-soluble ingredients reduce streaking and will not form a layer. Especially mild on skin, free of dyes and fragrances, biodegradable, free of solvents and emissions, and thus it supports a healthy living environment.
Osmo Wash and Care is especially suitable for the cleaning and care of oiled and waxed wooden flooring. It is also recommended for furniture, doors, wall and ceiling panelling.




Ingredients
Based on natural plant oils; 5-15% plant soaps (anionic tensides); <'5% non-ionic tensides; care components, suspending agent. Detailed declaration of ingredients available upon request.
Storage
5 years or longer if stored in the originally closed container. Do not expose to frost or temperatures above 30 °C!
COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
---|---|---|---|
| 1.00 | 13900030 | |
5.00 | 13900038 | ||
10.00 | 13900062 |


Manual application: Wash and Care is ideally used with Osmo Micro-Mop Plush. To removing everyday dirt, add approx. 1 capful (15 ml) of Wash and Care per 2 litres of water. Clean the floor with a damp mop (not wet!). Correct dosage saves money and is gentle on the environment. In comparison to conventional (non-concentrated) products, only a small quantity of product is needed. Do not mix with other cleaners!
Machine application: Distribute the diluted Wash and Care solution with a pump sprayer on the floor. Loosen dirt deposits with a single disc machine, e.g. Osmo FloorXcenter, and a white pad. Wipe up loosed dirt deposits immediately or remove these directly with a Microfibre Pad for single disc machines.
Re-oiling: To re-oil high traffic and contaminated areas, first clean intensively with Wash and Care (increase dosage to max. 1:1). Strong machine applications (e.g. single disc machine with a red pad) also remove the soluble wax and oil layer. After drying, one thin coat of an Osmo Polyx®-Oil must be applied to flooring.
With water.
Approx. 3-5 hours (normal climatic conditions, 23 °C/ 50% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
For on-the-spot stain removal and the occasional intensive restoration of waxed or oiled floors, we recommend using our renowned Osmo Liquid Wax Cleaner, which is based on natural plant oils and waxes (undiluted application with Osmo Active Fibre Cloth). For a complete renovation, we recommend applying an Osmo Polyx®-Oil.
Keep out of reach of children.
Contains
5-15% anionic tensides.
<5% non-ionic tensides.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 07 06 99). Only completely emptied cans can be recycled.

HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.