Hardener for Oil Stain
colours
Shortens drying times for Oil Stain significantly
Special clear polyisocyanate hardening additive for Osmo Oil Stain to reduce drying times.
Osmo Hardener for Oil Stain acts as an additive for Osmo Oil Stain that accelerates the drying process. When applying Oil Stain to wood species rich in extractives (e.g. Teak, Wege, Merbau), reliable drying is achieved by adding Hardener.
Ingredients
Aliphatic polyisocyanate, methoxy propyl acetate. Detailed declaration of ingredients available upon request.
Storage
1 year or longer if stored in the originally closed container. Leftover product mixture cannot be stored and reused.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 0.06 | 15100528 |
Preparations before use of Osmo Oil Stain are not influenced by the use of the Hardener. These are valid without any restrictions. For this purpose, please observe the product information for Osmo Oil Stain.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Add the complete contents of Osmo Hardener for Oil Stain to Oil Stain (1 L) and stir well so that both components are mixed well. When mixing partial amounts, add 6% (vol.) Hardener. The further application of Oil Stain is not influenced by using the Hardener.
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 3-5 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
By adding the Hardener, pot time is reduced to 60 minutes. Never mix more material than what can be processed within 45 minutes. If you do not use the entire can of Oil Stain, add 6% Hardener – mix in a separate container!
Flammable liquid and vapour.
May cause an allergic skin reaction.
Harmful if inhaled.
May cause respiratory irritation.
Keep away from heat/open flames. No smoking.
Wear protective gloves.
Use only outdoors or in a well-ventilated area.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTER/doctor if you feel unwell.
Store locked up.
Contains
Hexamethylene 1,6-diisocyanato homopolymer.
(< 0,1% diisocyanate (REACH XVII #74))
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 05 01*). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.