Maintenance Oil
colours
Ideal for refreshing and maintaining Polyx®-Oil surfaces.
Osmo Maintenance Oil is for the initial and routine maintenance of oiled and waxed wooden flooring. Dull and matt flooring is refreshed with Osmo Maintenance Oil. By applying Maintenance Oil at the right time, time-consuming sanding works and renovation can be avoided. Also suitable for changing the sheen of intact surfaces treated with Osmo Polyx®-Oil. Suitable for wood; microporous surface will not crack, peel, flake or blister. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water in accordance with German DIN 68861-1A – no water spots. The dry coating is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children‘s toys acc. EN 71.3).
For the maintenance and care of all wooden flooring treated with Polyx®-Oil: solid wood, plank, parquet, strip, OSB and cork flooring, as well as stairs and furniture surfaces. Highly recommended for public interiors (e.g. restaurants, museums and other high traffic floors).
Ingredients
Based on natural plant oils (sunflower oil, soybean oil, thistle oil) and waxes, paraffin, titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives. Dearomatised white spirit (benzene-free). VOC classification in compliance with EU regulations (2004/42/EC): out of scope. Detailed declaration of ingredients available upon request.
Storage
5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 1.00 | 15101040 | |
| 2.50 | 15101041 | ||
| 10.00 | 15101042 | ||
| 1.00 | 15101045 | |
| 2.50 | 15101046 | ||
| 10.00 | 15101047 | ||
| 1.00 | 15101060 | |
| 2.50 | 15101061 | ||
| 10.00 | 15101062 | ||
| 1.00 | 15101043 | |
| 2.50 | 15101044 | ||
| 10.00 | 10300420 |
NUMBER OF COATS
One coat on the cleaned surface is enough.
The oiled wood surface must be clean, dry and free of dust. Clean the surface thoroughly with Osmo Intensive Cleaner and rinse (damp mop) with clear water.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Osmo Maintenance Oil is ready to use. Before use shake well, or stir larger containers (2.5 l or 10.0 l) well. With Osmo Flooring Brush, Flat Brush, a trowel or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and buff with a white pad. Remove excess product. For smaller areas, Osmo Maintenance Oil can be applied with a lint-free cloth. Ventilate well while drying.
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 3-5 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
If the wood is raw or already greyed, the surface must be sanded and treated with Osmo Polyx®-Oil.
Keep out of reach of children.
Safety data sheet available on request.
Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.
EU limit value for this product
: out of scope.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.
