For high traffic wooden flooring and parquet
Osmo 2K Wood Oil is a high-quality solvent-free matt 2-component oil based on natural oils for professional use. It produces a microporous and breathable surface with only one coat.. Resistant to wine, beer, cola, coffee, water, etc. acc. German DIN 12720 (formerly 68861-1C). When dry, the coating is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children's toys acc. EN 71.3).
Osmo 2K Wood Oil is suitable for all parquet and wooden flooring (solid wood, plank, strip, stairs, etc.) acc. German DIN 18356 as well as furniture surfaces. Especially suitable for oily and resinous hardwoods and commercial interiors, which require the use of a solvent-free product.









Ingredients
Based on natural plant oils (linseed oil), waxes, siccatives (drying agents) and water repellent additives. Colour pigmented 2K Wood Oil also contains iron oxide and organic pigments as well as titanium dioxide as white pigment. EU limit value for this product (cat. A/j): 500 g/l VOC (2010). This product contains max. 50 g/l VOC. Detailed declaration of ingredients available upon request.
Storage
5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use. Leftover mixed product cannot be stored and reused.
COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
---|---|---|---|
| 0.375 | 13400420 | |
1.00 | 13400422 | ||
| 0.375 | 13400424 | |
1.00 | 13400426 | ||
| 0.375 | 13400428 | |
1.00 | 13400430 | ||
| 0.375 | 13400432 | |
1.00 | 13400434 | ||
| 0.375 | 13400436 | |
1.00 | 13400438 | ||
| 0.375 | 13400440 | |
1.00 | 13400442 | ||
| 0.375 | 13400444 | |
1.00 | 13400446 | ||
| 0.375 | 13400482 | |
| 13400448 | ||
1.00 | 13400450 | ||
| 0.375 | 13400452 | |
1.00 | 13400454 | ||
| 0.375 | 13400456 | |
1.00 | 13400458 | ||
| 0.375 | 13400460 | |
1.00 | 13400462 |
NUMBER OF COATS
One coat is enough!


Osmo 2K Wood Oil is not ready to use. Shortly before the application, add the hardener (mixing ratio 100:12 vol.-%) and mix both components thoroughly. Do not thin. Pot time is approx. 3-4 hours. Wood surface must be clean, sanded, dry and frost-free (moisture content max. 18%). Always wear a dust mask while sanding. Fill small cracks, larger joints or holes in wood (Osmo Wood Filler or Osmo Wood Putty 7350). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P 120-150, for furniture P 150-240. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.
Apply 2K Wood Oil thinly with Osmo Double Blade Scraper. On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints. Wait approx. 20-40 minutes for the oil to penetrate the wood. Afterwards buff oil into wood and even out the surface with a single disc machine and a white or beige pad (or ideally on furniture with Osmo HandXcenter and a white pad). Leave the surface to dry. Note: If the pad leaves streaks due to too much product, we recommend turning over the pad or replacing it. To prevent a possible pressure build-up in the container, allow oil and hardener mixtures to completely react before closing (approx. 12-16 h).
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 24 hours (normal climatic conditions, 20-23°C/50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
2K Wood Oil can be used solely with the hardener which was developed for it. Leftover mixed product cannot be used after pot time has expired and must be disposed appropriately. Wood surfaces treated with 2K Wood Oil are easy to maintain. Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp (not wet!) mop. To refresh and clean intensively, use Osmo Liquid Wax Cleaner when necessary. If more sheen is desired, after thoroughly drying apply Osmo Liquid Wax Cleaner thinly and polish when dry.
Do not get in eyes, on skin, or on clothing.
Use only outdoors or in a well-ventilated area.
Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.
Safety data sheet available on request.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 11*). Only completely emptied containers can be recycled.

HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.