Liquid Wax Refresher
colours
Ideal for refreshing oiled and waxed flooring and furniture surfaces
Liquid Wax Refresher is especially designed for the occasional refreshing and maintenance of wooden floors as well as furniture and other interior oiled and waxed surfaces. Osmo Liquid Wax Refresher regenerates the surface, is easy to use, and allows a quick and economical application.
Osmo Liquid Wax Refresher is ideal for refreshing all wooden surfaces treated with Osmo 2K Wood Oil or Osmo Polyx®-Oil.
Ingredients
Based on synthetic and natural waxes and preservatives (BIT and CIT/MIT). Detailed declaration of ingredients available upon request.
Storage
2 years or longer if stored in the originally closed container. Do not expose to frost or temperatures above 30 °C!
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER | |
|---|---|---|---|
| 1.00 | 13900168 |
Surface preparation:
First remove dirt and dust from the wood surface with a cloth, mop or vacuum cleaner. Areas treated with Osmo Polyx®-Oil can be cleaned with a damp cloth (add Osmo Wash and Care to mop water). Wipe dry to avoid moisture penetration in joints.
Methods of application:
Before using Liquid Wax Refresher, dilute with clear water, mixing ratio 1:1. The mixture can be applied easily to flooring with a household pump sprayer. Work in sections of 2-4 m². Afterwards spread the mixture out evenly with a damp mop or cloth. Make sure not to apply too much water. The floor must only be left damp, not wet, otherwise there is a risk of overapplication.
Cleaning of tools:
Immediately after use, with soap and water.
Drying time:
Approx. 15-20 minutes (normal climatic conditions, 20-23°C/50-65 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times significantly.
Caution:
Causes serious eye irritation. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Wash hands thoroughly after handling. Wear eye protection/face protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Contains benzisothiazolinone (BIT); mixture of: chloromethylisothiazolinone (CIT) and methylisothiazolinone (MIT) (3:1) (preservatives). May produce an allergic reaction.
Disposal:
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 20 01 30). Only completely emptied cans can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.