Osmo Farbe

Polyx®-Oil Anti-Slip

colours

Ideal for wooden flooring that requires higher slip resistance

Hardwax-oil wood coating for wooden flooring in indoor areas that require a higher slip resistance. Osmo Polyx®-Oil Anti-Slip uniquely combines the advantages of natural oils and waxes in one product. It is stain-resistant, water-repellent and abrasion-resistant. Compared to conventional coatings, the use of plant ingredients creates an even colour and a more harmonious appearance. Simple application – without primer or sanding between coats – saves time and money. Suitable for wood; microporous surface will not crack, peel, flake or blister. Resistant to wine, beer, cola, coffee, tea, fruit juice, milk and water acc. German DIN 68861-1A – no water spots. The dry coating is safe for humans, animals and plants (resistant to saliva and perspiration acc. German DIN 53160, suitable for children’s toys acc. EN 71.3).

Osmo Polyx®-Oil Anti-Slip is ideal for the protection of all wooden floors and stairs that require higher slip resistance (commercial/public interiors), such as solid wood, plank, strip, OSB and cork flooring or absorbent wood sheeting materials. Also suitable for Pitch Pine and Black Pine.

Non-slip surface through anti-slip additivesBased on renewable raw materialsMicroporous and breathable surfaceResistant to wine, beer, colaEasy to clean and maintainRecoatable after approx. 8-10 hours24 m²/1 lIdeal for commercial interiors
Scratch-resistant and hard-wearing
Spot applications possible
Anti-Slip EffectSafe for humans, animals and plants (when dry) - Suitable for children's toys - According to DIN EN 71.3; fast to perspiration and saliva
Product information sheetpdf, 165 KBFull declarationpdf, 186 KBSafety datasheetpdf, 169 KB

Ingredients

Based on natural plant oils (sunflower oil, soybean oil, thistle oil) and waxes, paraffin, iron oxide and organic pigments, titanium dioxide (white pigments), siccatives (drying agents) and water-repellent and non-slip additives. Dearomatised white spirit (benzene-free). EU limit value for this product (cat. A/i): 500 g/l VOC (2010). This product contains max. 500 g/l VOC. Detailed declaration of ingredients available upon request.

Storage

5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.

COLOUR CODECAN SIZE LITREARTICLE NUMBER

3088 Clear

Semi-matt (R9)

0.7510400077
2.5010400078
10.0010400079

3089 Clear

Satin (R11)

0.7510400095
2.5010400096
10.0010400097

3094 Black

Matt (R9)

0.7510100497
2.5010100498
10.0010100499

NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.

TOOLS
Flat BrushMicrofiber RollerFlooring/Decking brush

Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Polyx®-Oil is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (Wood Filler or Wood Putty). Sand wood surfaces carefully. Depending on wood species, begin with coarse sandpaper – final sanding work for flooring P100-120, for stage flooring P60-100. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner. The finished surface is influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces.

With Osmo Flat Brush, Floor Brush or Microfibre Roller, apply thinly along the wood grain and spread well. Allow to dry for approx. 8-10 hours under good ventilation. After drying, quickly apply a second coat also thinly. When renovating already oiled surfaces, one coat applied to the clean dry surface is usually sufficient. Osmo Polyx®-Oil Anti-Slip cannot be buffed with a single disc machine.

With Osmo Brush Cleaner (free of aromatic compounds).

Approx. 10-12 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times. After 2-3 weeks, the surface is fully cured.

Oils enhance the natural tone of wood (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying time. Polyx®-Oil Anti-Slip (3088, 3094) possess a satin smooth, yet non-slip surface. With Polyx®-Oil Anti-Slip (3088, 3094), a slip resistance class R9 is achieved. Polyx®-Oil Anti-Slip Extra (3089) exhibits an extremely high surface grip. Special additives provide the dried coating a texture that enables a slip resistance class R11. For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba etc.), we recommend using Osmo Wood Wax Finish Clear Extra Thin or Osmo Polyx®-Oil Express with Hardener as a base coat. A trial application is recommended. Wood surfaces treated with Osmo Polyx®-Oil Anti-Slip are easy to maintain. Remove debris with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp (not wet!) mop. To refresh surfaces, use Osmo Maintenance Oil 3098 (R9) or Osmo Polyx®-Oil Anti-Slip when necessary.

Keep out of reach of children.

Do not get in eyes, on skin, or on clothing.

If medical advice is needed, have product container or label at hand.

Use only outdoors or in a well-ventilated area.

Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.

The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations.

Safety data sheet available on request.

Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 12). Only completely emptied cans can be recycled.

Verbrauchsrechner

HOW MUCH COATING DO I NEED?

With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.

To the finish calculator