Polyx®-Oil Express
colours
The fast drying Polyx®-Oil for professionals!
Professional, very fast drying wood coating with special surface hardness, which uniquely combines the advantages of natural oils and waxes in one product. Osmo Polyx®-Oil Express is stain-resistant, water repellent and wear-resistant and smoothens the surface. Compared to conventional coatings, the use of plant ingredients creates an even colour and more harmonious appearance. Simple application – no primer or sanding between coats needed – this saves time and money. Suitable for wood; microporous surface will not crack, peel, flake or blister. Resistant to wine, beer, cola, tea, fruit juice, milk and water according to German DIN 68861-1A/EN 12720– no water spots. When dry, the coating is safe for humans, animals and plants (resistant to saliva and perspiration according to German DIN 53160, suitable for children’s toys as per EN 71.3).
Osmo Polyx®-Oil Express is ideal for the protection of all wooden flooring, such as solid wood, plank, strip, OSB and cork flooring, as well as furniture surfaces. In combination with Hardener 6632, also suitable for the clear treatment of hardwoods rich in extractives, such as Meranti, Wengé, Merbau etc.
Ingredients
Based on natural plant oils (sunflower oil, soybean oil, thistle oil) and waxes, paraffin, siccatives (drying agents) and water-repelling additives. Dearomatised white spirit (benzene-free). EU limit value for this product (cat. A/i): 500 g/l VOC (2010). This product contains max. 500 g/l VOC. Detailed declaration of ingredients available upon request.
Storage
5 years or longer if stored in the originally closed container. If thickened by frost, store at room temperature for 24 hours prior to use.
| COLOUR CODE | CAN SIZE LITRE | ARTICLE NUMBER |
|---|---|---|
| 0.75 | 10300132 | |
| 2.50 | 10300134 | |
| 10.00 | 10300136 | |
| 25.00 | 10300138 | |
| 0.75 | 10300282 | |
| 2.50 | 10300284 | |
| 10.00 | 10300286 | |
| 25.00 | 10300288 | |
| 0.75 | 10300293 | |
| 2.50 | 10300289 | |
| 10.00 | 10300291 | |
| 25.00 | 10300292 |
NUMBER OF COATS
Two coats on an untreated substrate; for renovations, normally one coat on the clean surface is sufficient.
Wood surface must be clean, dry and frost-free (moisture content max. 18%). Osmo Polyx®-Oil is ready to use. Do not thin. Stir well before use. Clean old microporous stains thoroughly. Old paints, varnishes and lacquers must be completely removed. Always wear a dust mask during sanding works. Fill small cracks, larger joints or holes in wood (Wood Filler or Wood Putty). Sand wood surfaces carefully. Depending on wood species, begin with coarse sandpaper – final sanding work for flooring P100-120, for furniture P120-180. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner.
The finished surface and the product coverage are influenced by several factors, including the condition of the wood. Therefore, a trial application is always required, especially for unfamiliar surfaces. All range specifications refer to Oak wood, sanded with P120-P150.
With Osmo Flat Brush, Floor Brush or Osmo Microfibre Roller, apply thinly along the wood grain and spread well within 5 minutes. Allow to dry for approx. 2-3 hours (clear) or approx. 6-8 hours (White transparent) under good ventilation. After drying, carry out second coat as stated above. When renovating previously oiled surfaces, one coat applied to the clean and dry surface is usually sufficient.
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 4-5 hours (normal climatic conditions, 20-23°C/ 50-65% rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
Applications with the Hardener for Polyx®-Oil Express 6632 as drying accelerator are also possible as an option. Oils enhance the natural wood tone (permanent wet effect). Applying the product too generously and insufficient ventilation lead to delays in drying time. For dark and extractive-rich hardwoods (e.g. Wenge, Merbau, Jatoba, etc.), a trial application is recommended. For cork surfaces, due to their high absorbency please ensure that the wood finish is applied especially thinly. On cork, longer drying times are to be taken into consideration (at least 6-8 hours). Caution: Apply max. one coat thinly to cabinet interiors and drawers with a cloth. Wood surfaces treated with Polyx®-Oil Express are easy to maintain. Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp (not wet!) mop. To refresh and clean intensively, use Osmo Liquid Wax Cleaner when necessary. If a higher gloss level is desired, after thoroughly drying apply Osmo Liquid Wax Cleaner thinly and polish when dry.
Flammable liquid and vapour.
Keep out of reach of children.
Keep away from heat/open flames. No smoking.
Do not get in eyes, on skin, or on clothing.
If medical advice is needed, have product container or label at hand.
Use only outdoors or in a well-ventilated area.
Warning: Materials impregnated with liquid product, such as cloths, may self-ignite. After use, let the materials to dry completely either spread out flat or in a closed metal container and then dispose of them properly.
The dried finish is classified as B2 (normal flammability) according to DIN 4102 regulations.
Safety data sheet available on request.
Dispose of product residuals according to the official guidelines (European Waste Code (EWC)-Code 08 01 11*). Only completely emptied containers can be recycled.
HOW MUCH COATING DO I NEED?
With our finish calculator, the right amount of coating necessary for your project can be calculated quickly and easily.
Please follow our advice in the product information sheets for the correct application.
